SUMA CRYSTAL A8 HARD WATER RINSE AID 20 L

Heavy-duty alkaline liquid detergent which is suitable for all water conditions. Specially formulated for the fast removal of dried-on foods and grease. Effectively controls limescale build up in the dishwasher.

Tech's

Code: 7010142
Weight: 20 L (20,8 kg)
Pieces / Box: 1
Appearance: Clear green liquid
pH neat: 1.5
Relative density ( 20C): 1.04

These figures are typical values and should not be interpreted as specifications.

7010142 Suma Crystal A8 Hard Water Rinse Aid 20L 20 L Suma Crystal A8 Hard Water Rinse Aid 20L Suma Crystal A8 Hard Water Rinse Aid 20 L

Description
Suma Crystal A8 is a concentrated low foam machine rinse additive with scale control properties.

Key properties
Suma Crystal A8 is a concentrated acid rinse additive. It has been specially formulated for use in a wide range of ware washing machines. The product contains a blend of low foam surfactants for rapid and streak free drying and for foam control in the dishwasher. It also contains scale control agents to keep the machine free from scale in medium hard and hard water conditions.

Benefits
• Ensures quick drying
• Gives streak and spot-free results
• Suitable for hard water due to scale control agents

Use instructions
Suma Crystal A8 is normally injected automatically into the final rinse water of ware washing machines at a concentration of 0.2-0.5 ml/l using JohnsonDiversey automatic dispensing equipment or integral dosing pumps, if fitted. It may also be applied manually into the rinse aid reservoir of smaller ware washing machines. Actual dosage levels are determined according to local site conditions.

Safe handling and storage information
Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data Sheet. Store in original container. Avoid extremes of temperature.

Product compatibility
Under recommended conditions of use, Suma Crystal A8 is suitable for use on most materials commonly encountered in the kitchen. The neat product is corrosive towards brass and copper. Do not dose the product before the boiler and try to avoid the use of copper/copper alloy piping or use a stainless steel injection point.