SUMA CRYSTAL A8.8 HARD WATER RINSE AID 20 L
Suma Cyrstal A8.8 is a low foam machine rinse additive with scale control properties.
Suma Cyrstal A8.8 is an acid rinse additive, specially formulated for use in a wide range of ware washing machines. The product contains a blend of low foam surfactants for rapid and streak free drying and for foam control in the dishwasher. It also contains scale control agents to keep the machine free from scale in medium hard and hard water conditions
• Ensures quick drying
• Gives streak and spot-free results
• Suitable for hard water due to scale control agents
Suma Cyrstal A8.8 is normally injected automatically into the final rinse water of ware wash machines at a concentration of 0.1-0.3 ml/l using Diver- sey Care automatic dispensing equipment or integral dosing pumps if fitted. It may also be applied manually into the rinse aid reservoir of smaller ware washing machines. Actual dosage levels are determined according to local site conditions.
Safe Handling and Storage Information
Full guidance on the handling and disposal of this product is provided in a separate Safety Data Sheet. Store in original container. Avoid extremes of temperature.
Under recommended conditions of use, Suma Maro A8.8 is suitable for use on most materials commonly encountered in the kitchen. The neat product is corrosive towards brass and copper. Do not dose the product before the boiler and try to avoid the use of copper / copper alloy piping or use a stain- less steel injection point.